zurück zur Artikelliste
  • Anlegetemperaturfühler ANTF2 von TiTEC Messtechnik
  • Anlegetemperaturfühler ANTF2-Zeichnung von TiTEC Messtechnik

CONTACT TEMPERATURE SENSOR
ANTF2 / MU

TiTEC GmbH ANTF2 / MU

Anwendung

For measuring the temperature on roand surfaces such as pipes. There are two sensor types available. Both are equipped with an aluminum prism and delivered with a tension band, allowing for easy and fast mounting on roand surfaces such as cold and hot water pipes. The
sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC.

Technische Spezifikationen

 
Transmitter
Required temperature sensor:Pt1000 class B (2-wire)
Power supply:15-36 V/DC with 4-20 mA
15-36 V/DC, 24 V/AC with 0-10 V
Apparent ohmic resistance:300-1000 Ohm (with 4-20 mA)
Load at analogue output:min. Load resistance 10 kOhm at 0-10 V
Power input with 0...10 V:20 mA
Power input with 4...20 mA:24-44 mA
Accuracy:±0,2K + max. 3 % of final value
Measuring range:24 measuring ranges available
Operating temperature transmitter:-30 °C … +70 °C
Connection:3-wire (2-wire optional with 4-20 mA)
Norms:CE, EMC pursuant to EN61326-1 2006
EMC directive 89/336/EEC
Temperature Sensor
Measuring range:-50 °C … +105 °C
Temperature sensor:Pt1000 class B (2-wire)
Connection:Screw clamps, max 1.5 mm²
Material Anlegeelement:aluminum
Tmax. (housing):+100 °C
Casing:PA6 15% GK, Colour RAL 9010
Housing dimensions:65 x 60 x 38 mm
Protection class:IP54
Mounting equipment (included):Tension band

Newsletter Login