zurück zur Artikelliste
  • Der Kanalluftqualitätsfühler von TiTEC Messtechnik
  • Kanalfühler zur Kohlendioxidmessung in der Zeichnung von TiTEC Messtechnik

DUCT SENSOR FOR CARBON DIOXIDE MEASUREMENTS – KACO2
KACO2

TiTEC GmbH KACO2

Anwendung

Our KACO2 records the ambient air’s CO2 concentration in air ducts of air-conditioning systems. The KACO2 converts the the values measured in the ranges of optionally 0-2000 ppm or 0-5000 ppm into a linear 0-10 V output signal. The CO2 value is measured via the NDIR sensor, which is able to compensate possible pollution with the help of its 2-ray measuring principle. Optionally, our KACO2 is available with an additional sensor for measuring temperature and humidity.

Technische Spezifikationen

 
Power supply:At 0 … 10 V: 16 … 24 VDC or 24 VAC
At 4 … 20 mA: 16 … 24 VDC
Power consumption:< 9 mA
Electrical connection:Screw clamps
Output:0...10 V or 4-20mA
Sensor element:(NDIR) sensor with automatic backgroand calibration
Measuring range CO2:0…2000 ppm
Accuracy:< ± (50ppm 2% of scale reading) at 25°C and 1013 mbar
Optional:
Temperature:0 … 10 V or 4-20 mA / -30 °C … +70 °C
Accuracy:± 0,5°C
Humidity:0...10 V or 4-20mA / 0...100% r.h.
Accuracy:< 3% at 25°C between 10...90% r.h.
Operating temperatur:-20°C...+50°C
Humidity:10...95% r.h.
Protection class:IP65 (Housing)
Casing:Plastic
Mounting equipment (included):Mounting flange
Data-Sheet

Merkmale

TypeOutput ppmOutput Temp.Output Humidity
KACO2-U0-10V
KACO2/T-U0-10V0-10V
KACO2/T/F-U0-10V0-10V0-10V
KACO2-I4-20mA
KACO2/T-I4-20mA4-20mA
KACO2/F-I4-20mA 4-20mA

Newsletter Login