zurück zur Artikelliste
  • Der Oberflächentemperaturfühler von TiTEC Messtechnik
  • Oberflächentemperaturfühler OBTF-Zeichnung von TiTEC Messtechnik

SURFACE TEMPERATURE SENSOR
OBTF / MU

TiTEC GmbH OBTF / MU

Anwendung

The Surface Temperature Sensor OBTF is designed for measuring the temperature on plain surfaces such as windows. The feeler is made of aluminum and can be mounted to the respective surface with the bore hole (4,1 mm) located on the upper half of the sensor. The sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC.

Technische Spezifikationen

 
Transmitter
Required temperature sensor:Pt1000 class B (2-wire)
Power supply:15-36 V/DC with 4-20 mA
15-36 V/DC, 24 V/AC with 0-10 V
Apparent ohmic resistance:300-1000 Ohm (with 4-20 mA)
Load at analogue output:min. Load resistance 10 kOhm bei 0-10V
Power input with 0...10 V:20 mA
Power input with 4...20 mA:24-44 mA
Accuracy:±0,2K + max. 3 % of final value
Measuring range:24 measuring ranges available
Operating temperature transmitter:-30 °C … +70 °C
Connection:3-wire (2-wire optional with 4-20 mA)
Norms:CE, EMC pursuant to EN61326-1 2006,
EMC directive 89/336/EEC
Temperature Sensor
Measuring range:-35 °C … +105 °C
Temperature sensor:Pt1000 class B (2-wire)
Connection:Screw clamps, max 1.5 mm²
Sleeve:8 x 8 x 40 mm, aluminum
Tmax. (housing):+100 °C
Casing:PA6 15% GK, Colour RAL 9010
Housing dimensions:65 x 60 x 38 mm
Protection class:P54

Newsletter Login