HTFJ1 is a high-temperature sensor with a temperature measurement range of -50 ° C … +400 ° C. It has a hard built-in flow nozzle and using the mounting flange can be installed on a vessel or measured channel. With appropriate sensors (see table) sensors can be installed on all the running systems of the adjustment and indication.
Produktkategorien: Temperaturfühler
Screwing the sensor – ESF2
Our screw sensor ESF is equipped with thread G1/4 type “and can be used at pressure up to 40 bar in gaseous and liquid environment. It is applied in heating, ventilation and air conditioning technology. With corresponding sensors (see tab.) these sensors can be connected to all the running systems of the adjustment and indication.
Overview of temperature sensors
Screwing the sensor – ESF2/MU
Screw ESF sensor is equipped with a thread G1/4″and can be used at pressure up to 40 bar in gaseous and liquid environments. It finds its application in heating, ventilation and air conditioning technology. With appropriate sensors (see tab.) sensors can be connected to all the running systems of the adjustment and indication. The sensors have a standardized signal 0 … 10V- or 4 … 20mA and can be connected to each SPS or DCC.
Pendulum sensor for rooms – RPF
The sensor serves to measure the temperature in the smart rooms. It is suspended as a pendulum and thus is suitable for measuring the temperature primarily in large rooms and hangars. By means of the appropriate sensors (see tab.) sensor can be connected to all the running systems of the adjustment and indication.
Cable temperature sensor – KBTF
KBTF sensor is used for measurement of temperature in gaseous or in combination with an immersion sleeve as well in liquid environments (boilers, accumulators, pipelines). By means of appropriate sensors (see the tab.) it can be connected to all the running systems of the adjustment and indication. In the case of PVC and silicone conductors the sleeve according to standard has a double fringing. Execution for glass fiber conductors and VA has a hexahedral crimping. Note: The sensor with the glass fiber conductor cannot be executed with WPC.
Massensensor
Mass temperature sensor is designed for use in plastic extrusion plants. Thanks to specially built-in measuring points the low error of heat extraction is provided. Measuring probe is carried out in different designs, for example, in a shape of a sword, a cone, etc.
The direction of the built-in measuring probe in the form of a sword is indicated by marking.
Our weight sensors are equipped with both a sensor Pt100, and thermocouples type K, J and L.
Optional sensors can have a replaceable flow nozzle.
Погружной датчик температуры с силиконовым проводником – KBTFL
Датчик служит для измерения температуры в газообразных средах и в комбинации с погружной гильзой пригоден также для замеров в жидких средах (котлы, накопители, трубопроводы). С помощью гильзы длиной 200 мм он находит своё применение и в качестве погружного датчика температуры. Входящий в комплект поставки пластиковый фланец быстро и просто установить датчик на месте назначения. Посредством соответствующих сенсоров (см. табл.) датчик можно подключить ко всем ходовым системам регулировки и индикации.
RAUMTEMPERATURFÜHLER (AUFPUTZ)
Unsere Raumtemperaturfühler dienen der Messung der Temperatur in Wohn- und Büroräumen, Empfangshallen, Foyers usw. Das moderne und schlichte Raumtemperaturfühler Design ermöglicht eine einfache und unauffällige Montage. Die großen Lüftungsgitter des Raumtemperaturfühler gewährleisten eine nahezu barrierefreie Luftzirkulation, wodurch eine hohe Messgenauigkeit erreicht wird. Die Raumtemperaturfühler verfügen wahlweise über ein standardisiertes 0…10V- oder 4…20mA-Normsignal und sind somit auf jede SPS oder DDC aufschaltbar.