zurück zur Artikelliste
  • Anlegetemperaturfühler ANTF3MS von TiTEC Messtechnik
  • Anlegetemperaturfühler ANTF3MS-Zeichnung von TiTEC Messtechnik

CONTACT TEMPERATURE SENSOR
ANTF3MS / MU

TiTEC GmbH ANTF3MS / MU

Anwendung

For measuring the temperature on roand surfaces such as pipes. The sensors are available as stainless steel and brass versions. The roanded egde at the end of the sensor and the included tension band allow for easy mounting on pipes. The sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC. A tension band is included in the delivery.

Technische Spezifikationen

 
Required temperature sensor:Pt1000 class B (2-wire)
Power supply:15-36 V/DC with 4-20 mA
15-36 V/DC, 24 V/AC with 0-10 V
Apparent ohmic resistance:300-1000 Ohm (with 4-20 mA)
Load at analogue output:min. Load resistance 10 kOhm at 0-10 V
Power input with 0...10 V:20 mA
Power input with 4...20 mA:24-44 mA
Accuracy:±0,2K + max. 3 % of final value
Measuring range:24 measuring ranges available
Operating temperature transmitter:-30 °C … +70 °C
Connection:3-wire (2-wire optional with 4-20 mA)
Norms:CE, EMC pursuant to EN61326-1 2006,
EMC directive 89/336/EEC
Temperature Sensor
Measuring range:-50 °C … +180 °C
Temperature sensor:Pt1000 class B (2-wire)
Connection:Screw clamps, max 1.5 mm²
Contact element material:Brass
Power supply cord:2 m Silicone
Tmax. (housing):+100 °C
Casing:PA6 15% GK, Colour RAL 9010
Housing dimensions:65 x 60 x 38 mm
Protection class:IP54
Mounting equipment (included):Tension band

Newsletter Anmeldung


Bitte senden Sie mir entsprechend Ihrer Datenschutzerklärung regelmäßig und jederzeit widerruflich Informationen zu folgendem Produktsortiment per E-Mail zu: Messtechnik und Sensorik