zurück zur Artikelliste
DIN RAIL TRANSMITTER FOR THERMOCOUPLES TYPE K – MUF-HS-TE
Data-Sheet
DIN RAIL TRANSMITTER FOR THERMOCOUPLES TYPE K – MUF-HS-TE
MUF-HS-TE
Anwendung
Our measuring transducer MUF-HS-TE records the temperature via a connected thermocouple NiCr-Ni, Typ K and coverts the value into a standardized analogue output signal in the range between 0-10V/4-20 mA.
Measuring ranges can be selected and adjusted with the help of a DIP switch.
On request additional options can be offered.
Offset can be corrected by ±8°K using the potentiometer.
Technische Spezifikationen
| Power supply U | 12 … 24 V AC/DC |
| Power supply I | 12 … 24 V DC |
| Analogue output burden: | 250 … 600 Ohm (4 … 20 mA) |
| Analogue output load: | 10 ... 100 kOhm (0 … 10 V) |
| Current consumption 0 … 10 V: | 20 mA |
| Current consumption 4 … 20 mA: | 24 … 44 mA |
| Connection | 3-wire (4-20 mA optional 2-wire) |
| Tolerance temperature: | Depends on used TC |
| Potentiometer: | Offset ± 8°K |
| Measurement ranges: | 9 measurement ranges selectable |
| Operating temperature MUF | -40 °C … +85 °C |
| Needed temperature sensor | Thermocouple NiCr-Ni, Type K |
| Connection | Screw-In terminals 1,5 mm² |
| Casing material | Polycarbonat PC-F |
| Dimension Casing (L x W x H) | 15 x 75 x 53 mm |
| Flammability UL 94: | V0 |
| Protection class | IP20 |
| Standards | DIN EN 61326-2-1:201, EG Directive 2004/108/EG |