zurück zur Artikelliste
OUTDOOR TEMPERATURE SENSOR
OUTDOOR TEMPERATURE SENSOR
AUTFEXT / MU
Anwendung
Our AUTFEXT are available with all conventional sensor types. The temperature is measured inside the sensor tube. The AUFTFEXTS is equipped with a tapered sleeve for an ever faster response time. The sensors are mainly used in weather-dependend environments, such as
outer walls, where direct insolation should be avoided. The sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC.
Technische Spezifikationen
| Transmitter | |
| Required temperature sensor: | Pt1000 class B (2-wire) |
| Power supply: | 15-36 V/DC with 4-20 mA |
| 15-36 V/DC, 24 V/AC with 0-10 V | |
| Apparent ohmic resistance: | 300-1000 Ohm (with 4-20 mA) |
| Load at analogue output: | min. Load resistance 10 kOhm at 0-10 V |
| Power input with 0...10 V: | 20 mA |
| Power input with 4...20 mA: | 24-44 mA |
| Accuracy: | ±0,2K + max. 3 % of final value |
| Measuring range: | 24 measuring ranges available |
| Operating temperature transmitter: | -30 °C … +70 °C |
| Connection: | 3-wire (2-wire optional with 4-20 mA) |
| Norms: | CE, EMC pursuant to EN61326-1 2006, EMC directive 89/336/EEC |
| Temperature Sensor | |
| Measuring range: | -50 °C … +180 °C |
| Temperature sensor: | Pt1000 class B (2-wire) |
| Connection: | Screw clamps, max 1.5 mm² |
| Protective fitting: | VA |
| Diameter Protective fitting: | 6 mm |
| Sleeve length: | 42 mm |
| Tmax. (housing): | +100 °C |
| Casing: | PA6 15% GK, Colour RAL 9010 |
| Housing dimensions: | 65 x 60 x 38 mm |
| Protection class: | IP65 |
| Mounting accessories (optional): | Screws and dowels |