The measuring transducer for M12-connectors HTFM/MU records the temperature via a connected Pt-sensor and coverts the value into a standardized analogue output signal in the range between 0-10V or 4-20 mA.
Produktkategorien: Temperature
Plug-in sensor – HTFJ1
HTFJ1 is a high-temperature sensor with a temperature measurement range of -50 ° C … +400 ° C. It has a hard built-in flow nozzle and using the mounting flange can be installed on a vessel or measured channel. With appropriate sensors (see table) sensors can be installed on all the running systems of the adjustment and indication.
Screwing the sensor – ESF2
Our screw sensor ESF is equipped with thread G1/4 type “and can be used at pressure up to 40 bar in gaseous and liquid environment. It is applied in heating, ventilation and air conditioning technology. With corresponding sensors (see tab.) these sensors can be connected to all the running systems of the adjustment and indication.
Overview of temperature sensors
Measuring converter for DIN-rail mounting for PT1000/PT100 – MUF-HS
Measurement converter allows to measure the temperature by connecting sensor PT1000 and measure conversion to a standardized analogue output signal of 0 … 10V, 4 … 20mA.
Converter is equipped with a case type EMG and 2- or 3-wire connection slot for PT1000/PT100 sensor.
By means of DIP-switch it is possible to set 24 various measurement ranges and though on request other ranges can be implemented.
With the potentiometer offset can be adjusted by ± 8 ° K.
Pendulum sensor for rooms – RPF
The sensor serves to measure the temperature in the smart rooms. It is suspended as a pendulum and thus is suitable for measuring the temperature primarily in large rooms and hangars. By means of the appropriate sensors (see tab.) sensor can be connected to all the running systems of the adjustment and indication.
Duct / immersion temperature sensor – KNTF
The sensor according to the standard is stable in terms of dewfall. In combination with immersion sleeve it is used to perform temperature measurement in the liquid / corrosive environments. By means of mounting flange sensor can be used for measurements in gaseous environments. The device finds its application in heating, ventilation, refrigeration and air conditioning technology. With help of the corresponding sensor (see tab.) sensor can be connected to all the running systems of the adjustment and indication.
Cable temperature sensor – KBTF
KBTF sensor is used for measurement of temperature in gaseous or in combination with an immersion sleeve as well in liquid environments (boilers, accumulators, pipelines). By means of appropriate sensors (see the tab.) it can be connected to all the running systems of the adjustment and indication. In the case of PVC and silicone conductors the sleeve according to standard has a double fringing. Execution for glass fiber conductors and VA has a hexahedral crimping. Note: The sensor with the glass fiber conductor cannot be executed with WPC.
Massensensor
Mass temperature sensor is designed for use in plastic extrusion plants. Thanks to specially built-in measuring points the low error of heat extraction is provided. Measuring probe is carried out in different designs, for example, in a shape of a sword, a cone, etc.
The direction of the built-in measuring probe in the form of a sword is indicated by marking.
Our weight sensors are equipped with both a sensor Pt100, and thermocouples type K, J and L.
Optional sensors can have a replaceable flow nozzle.
Погружной датчик температуры с силиконовым проводником – KBTFL
Датчик служит для измерения температуры в газообразных средах и в комбинации с погружной гильзой пригоден также для замеров в жидких средах (котлы, накопители, трубопроводы). С помощью гильзы длиной 200 мм он находит своё применение и в качестве погружного датчика температуры. Входящий в комплект поставки пластиковый фланец быстро и просто установить датчик на месте назначения. Посредством соответствующих сенсоров (см. табл.) датчик можно подключить ко всем ходовым системам регулировки и индикации.
OUTDOOR TEMPERATURE SENSOR WITH SUN PROTECTION – AUTFEXT2 / MU
The AUTFEXT2 is used for temperature measurements in outdoor areas. Radiant heat is diverted via the integrated feeler tube, protecting the device from insolation and thus allowing for a more accurate measurement. The sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC.
OUTDOOR TEMPERATURE SENSOR
Our AUTFEXT are available with all conventional sensor types. The temperature is measured inside the sensor tube. The AUFTFEXTS is equipped with a tapered sleeve for an ever faster response time. The sensors are mainly used in weather-dependend environments, such as
outer walls, where direct insolation should be avoided. The sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC.
OUTDOOR TEMPERATURE SENSOR
Our AUTF is available with all conventional sensor types. Temperatures are recorded inside the sturdy and humidity-resistant plastic housing. The AUTF is mainly used in weather-dependend environments, such as outer walls, where direct insolation should be avoided. The sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC.