Measurement converter allows to measure the temperature by connecting sensor PT1000 and measure conversion to a standardized analogue output signal of 0 … 10V, 4 … 20mA.
Converter is equipped with a case type EMG and 2- or 3-wire connection slot for PT1000/PT100 sensor.
By means of DIP-switch it is possible to set 24 various measurement ranges and though on request other ranges can be implemented.
With the potentiometer offset can be adjusted by ± 8 ° K.
The AUTFEXT2 is used for temperature measurements in outdoor areas. Radiant heat is diverted via the integrated feeler tube, protecting the device from insolation and thus allowing for a more accurate measurement. The sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC.
Our AUTFEXT are available with all conventional sensor types. The temperature is measured inside the sensor tube. The AUFTFEXTS is equipped with a tapered sleeve for an ever faster response time. The sensors are mainly used in weather-dependend environments, such as
outer walls, where direct insolation should be avoided. The sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC.
Our AUTF is available with all conventional sensor types. Temperatures are recorded inside the sturdy and humidity-resistant plastic housing. The AUTF is mainly used in weather-dependend environments, such as outer walls, where direct insolation should be avoided. The sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC.
The Surface Temperature Sensor OBTF is designed for measuring the temperature on plain surfaces such as windows. The feeler is made of aluminum and can be mounted to the respective surface with the bore hole (4,1 mm) located on the upper half of the sensor. The sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC.
For measuring the temperature on roand surfaces such as pipes. The sensors are available as stainless steel and brass versions. The roanded egde at the end of the sensor and the included tension band allow for easy mounting on pipes. The sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC. A tension band is included in the delivery.
For measuring the temperature on roand surfaces such as pipes. The sensors are available as stainless steel and brass versions. The roanded egde at the end of the sensor and the included tension band allow for easy mounting on pipes. The sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC. A tension band is included in the delivery.
For measuring the temperature on roand surfaces such as pipes. There are two sensor types available. Both are equipped with an aluminum prism and delivered with a tension band, allowing for easy and fast mounting on roand surfaces such as cold and hot water pipes. The
sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC.
For measuring the temperature on roand surfaces such as pipes. There are two sensor types available. Both are equipped with an aluminum prism and delivered with a tension band, allowing for easy and fast mounting on roand surfaces such as cold and hot water pipes. The
sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC.
The HTFB1 is a high temperature sensor with a measuring range of -50°C … +600°C. The device is equipped with an internal measuring unit and can easily be mounted on the container or duct to be measured (with the mounting flange included in the delivery). The sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC.
For measuring the temperature in gaseous media (when combined with a mounting flange). The fields of application are heating, ventilation and refrigeration engineering as well as air-conditioning. The sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC.
Our Duct/Immersion temperature sensors are equipped with dew point resistance by default. In combination with an immersion sleeve, the KNTF can also be used for measuring the temperature of liquid/non-aggressive media. Gaseous media may be measured with help of our monuting flange MF. The sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC.